EasyRAID E6 Guide de l'utilisateur télécharger pdf (Page 42)

3-6

Configuration

8. Termination

Terminating a SCSI chain is achieved by adding a terminator to

each end of the SCSI bus. The Disk Array supports active

termination at the controller's SCSI end.

Termination "enabled" must be set when the Disk Array is at

one end of the SCSI Bus.

9. Set Password

Press " Enter " to activate the Password setting. When the cursor

stop on the desired "number" or "character", Using " " and

" " function keys to choose the desired characters and then

press " Enter " to confirm it.

Press " ESC " function key for password "No Change"

10. Save Configuration & Restart

Select the Save Configuration function and Press the " Enter " key

to save and activate your selections.

Warning ! All data will be lost if you change RAID Levels .

Saving configuration changes causes the disk array

controller's working parameters to change. This can

produce unpredictable results if it occurs during Host

and Array activity. All activity to the controller should

be stopped before saving configuration changes.

WARNING

STOP

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 84 85

Pas de commentaire

EasyRAID E6 Guide de l'utilisateur Page 42